Publications 2009-2006

Papers in refereed scientific journals 2009

Investigation of the Evolution of the Oxide Scale Formed on 310 Stainless Steel Oxidized at 600 A degrees C in Oxygen with 40% Water Vapour Using FIB and TEM 
Liu F, Tang JE, Asteman H, et al.
OXIDATION OF METALS   Volume: 71   Issue: 1-2   Pages: 77-105   2009

Influence of Pt on the metal-oxide interface during high temperature oxidation of NiAl bulk materials

Svensson H, Christensen M, Knutsson P, et al.
CORROSION SCIENCE   Volume: 51   Issue: 3   Pages: 539-546    2009

Formation and Healing of Voids at the Metal-Oxide Interface in NiAl Alloys
Svensson H, Knutsson P, Stiller K 
OXIDATION OF METALS   Volume: 71   Issue: 3-4   Pages: 143-156    2009

The effect of a sulphur-containing additive on the initial corrosion of superheater tubes in a waste-fired boiler
P. Viklund, R. Pettersson, A. Hjörnhede, P. Hendersson, P. Sjövall: Accepted for publication in Corrosion Engineering -Science and Technology, Volume: 44   Issue: 3   Pages: 234-240   2009

Microstructural investigation of the initial oxidation at 1450°C and 1500°C of a Mo(Si,Al)2-based composite
M. Halvarsson, T. Jonsson, L. Ingemarsson, M. Sundberg, J.-E. Svensson and L.-G. Johansson, Materials at High Temperature Volume: 26   Issue: 2   Pages: 137-143    2009

An ESEM in-situ investigation of the influence of H2O on iron oxidation at 500°C
T. Jonsson, B. Pujilaksono, S. Hallström, J. Ågren, J. –E. Svensson, L. –G. Johansson and M. Halvarsson Corrosion Science Volume: 51   Issue: 9   Pages: 1914-1924 2009

TEM investigation of oxide scales formed on 304L steel at 600°C in oxygen with 40% water vapour
J. E. Tang, H. Asteman, J.-E. Svensson, L.-G. Johansson and M. Halvarsson , Oxidation of Metals Volume: 71   Issue: 1-2   Pages: 77-105    2009

The oxidation behaviour of a (Mo,W)Si2 based composite in dry and wet oxygen atmosphere in the temperature range 350-900°C
K. Hansson, J. E. Tang, M. Halvarsson, R. Pompe, M. Sundberg and J.-E. Svensson, Journal of the European Ceramic Society Volume: 29   Issue: 10   Pages: 2105-2118    2009

Oxidation of FeCrAl foils at 500-900°C in dry O2 and O2 with 40%H2O
J. Engkvist, S. Canovic, F. Liu, H. Götlind, J.-E. Svensson, L.-G. Johansson, M. Olsson, M. Halvarsson, Accepted for publication in Materials at High Temperature Volume: 26   Issue: 2   Pages: 199-210    2009

Papers in refereed scientific journals 2008

Fireside corrosion of stainless and low alloyed steels in a waste-fired CFB boiler; The effect of adding sulphur to the fuel.
Folkeson N, Pettersson J, Pettersson C, et al. HIGH TEMPERATURE CORROSION AND PROTECTION OF MATERIALS 7, MATERIALS SCIENCE FORUM   Volume: 595-598   Pages: 289-297  2008

Alkali Induced Corrosion of 304-type Austenitic Stainless Steel at 600 degrees C; Comparison between KCl, K2CO3 and K2SO4
Pettersson J, Svensson JE, Johansson LG 
HIGH TEMPERATURE CORROSION AND PROTECTION OF MATERIALS 7, MATERIALS SCIENCE FORUM  Volume: 595-598   Pages: 367-375    2008

Cyclic oxidation of two FeCrAIRE foils at 1100 degrees C – The influence of the concentration of minor alloying elements on scale microstructure
Liu F, Gotlind H, Canovic S, et al.
HIGH TEMPERATURE CORROSION AND PROTECTION OF MATERIALS 7, MATERIALS SCIENCE FORUM   Volume: 595-598   Pages: 707-716    2008

The influence of H2O on iron oxidation at 600 degrees C: A microstructural study
Jonsson T, Pujilaksono B, Fuchs A, et al.
HIGH TEMPERATURE CORROSION AND PROTECTION OF MATERIALS 7, MATERIALS SCIENCE FORUM   Volume: 595-598   Pages: 1005-1012    2008

Scale growth on austenitic alloys under KCl deposits at 500 degrees
C 
Andersson P, Norell M 
HIGH TEMPERATURE CORROSION AND PROTECTION OF MATERIALS 7, MATERIALS SCIENCE FORUM   Volume: 595-598   Pages: 333-342    2008

The Influence of Small Amounts of KCl(s) on the Initial Stages of the Corrosion of Alloy Sanicro 28 at 600 degrees
C Pettersson C, Johansson LG, Svensson JE OXIDATION OF METALS Volume: 70 Issue: 5-6 Pages: 241-256 2008

Early stages of the oxidation of a FeCrAlRE alloy (Kanthal AF) at 900 degrees C: A detailed microstructural investigation
Liu F, Gotlind H, Svensson JE, et al. CORROSION SCIENCE Volume: 50 Issue: 8 Pages: 2272-2281 2008

Paralinear oxidation of chromium in O2+H2O environment at 600-700 degrees C
Pujilaksono B, Jonsson T, Halvarsson M, et al.OXIDATION OF METALS Volume: 70 Issue: 3-4 Pages: 163-188 2008

Influence of SO2 on the oxidation of 304L steel in O-2+40%H2O at 600 degrees C
Jardnas A, Svensson JE, Johansson LG OXIDATION OF METALS Volume: 69 Issue: 3-4 Pages: 249-263 2008

High temperature corrosion of cast alloys in exhaust environments I-ductile cast irons
Tholence F, Norell M OXIDATION OF METALS Volume: 69 Issue: 1-2 Pages: 13-36 2008

High temperature corrosion of cast alloys in exhaust environments. II-Cast stainless steels
Tholence F, Norell M OXIDATION OF METALS Volume: 69 Issue: 1-2 Pages: 37-62 2008

Oxidation and alkali sulfate-induced corrosion of aluminide diffusion coating with and without platinum
Knutsson PA, Stiller K MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION Volume: 59 Issue: 6 Pages: 484-488 2008

Materials performance in simulated waste combustion environments
Pettersson R, Flyg J, Viklund CORROSION ENGINEERING SCIENCE AND TECHNOLOGY Volume: 43 Issue: 2 Pages: 123-128 2008

Effect of temperature gradient and sulfur dioxide addition on erosion-corrosion off iron- and nickel-based alloys
Nafari A, Norell M, Jelvestam U, et al. MATERIALS AT HIGH TEMPERATURES Volume: 25 Issue: 1 Pages: 1-16, 2008

Thin foil analysis in the SEM
Halvarsson M, Jonsson T, Canovic S
Electron Microscopy and Analysis Group Conference, SEP 03-07, 2007 Glasgow Caledonian Univ, Glasgow, SCOTLAND , JOURNAL OF PHYSICS CONFERENCE SERIES   Volume: 126  Pages: 12075-12075   2008

Papers in refereed scientific journals 2007

Platinum-catalyzed high temperature oxidation of metals
Dong Q Hultquist G., Sproule GI, et al.
CORROSION SCIENCE   Volume: 49   Issue: 8   Pages: 3348-3360   2007

The effect of traces of SO2 on iron oxidation: A microstructural study
Jonsson, T; Jardnas, A; Svensson, JE, et al.
OXIDATION OF METALS   Volume: 67   Issue: 3-4   Pages: 193-213   2007

The effect of water vapor on the initial stages of oxidation of the FeCrAl alloy Kanthal AF at 900 degrees
C 
Gotlind, H; Liu, F; Svensson, JE, et al.
OXIDATION OF METALS   Volume: 67   Issue: 5-6   Pages: 251-266   2007

Initial stages of the HCl-induced high-temperature corrosion of alloy 310 

Folkeson, N; Johansson, LG; Svensson, JE
JOURNAL OF THE ELECTROCHEMICAL SOCIETY   Volume: 154   Issue: 9   Pages: C515-C521    2007

Investigation of FIB-thinned TEM cross-sections of oxide scales formed on type 310 steel at 600 degrees C in water vapour-containing oxygen atmospheres
Tang, JE; Liu, F; Asteman, H, et al.
MATERIALS AT HIGH TEMPERATURES   Volume: 24   Pages: 27-55    2007

Influence of H2O(g) on the oxide microstructure of the stainless steel 353MA at 900 degrees C in oxygen
Jonsson, T; Liu, F; Canovic, S, et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY   Volume: 154   Pages: C603-C610 2007

Critical corrosion phenomena on superheaters in biomass and waste-fired boilers
Johansson, LG; Svensson, JE; Skog, E, et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL   Volume: 14   Pages: 35-39 2007

Potassium, chlorine, and sulfur in ash, particles, deposits, and corrosion during wood combustion in a circulating fluidized-bed boiler
Davidsson, KO; Amand, LE; Leckner, B, et al. ENERGY & FUELS   Volume: 21   Issue: Pages: 71-81    2007

In-situ impedance spectroscopy study of electrical conductivity and ionic transport in thermally grown oxide scales on a commercial FeCrA1 alloy
Oijerholm, J; Pan, J; Lu, Q, et al. OXIDATION OF METALS   Volume: 68   Pages: 253-269    2007

Study of initial oxidation of engineering alloys by high-temperature cyclic voltammetry
Oijerholm, J; Fafilek, G; Pan, J
ELECTROCHEMICAL AND SOLID STATE LETTERS   Volume: 10   Issue: 6   Pages: C47-C50 2007

Papers in refereed scientific journals 2006

Reducing superheater corrosion in wood-fired boilers
Henderson P, Szakalos P, Pettersson R, et al.
MATERIALS AND CORROSION- 57 (2): 128-134 2006

The influence of sulphur additions on the corrosive environment in a waste-fired CFB boiler
Pettersson J, Pettersson C, Folkeson N, et al. MATERIALS SCIENCE FORUM 522-523: 563-570 2006

Microstructural investigation of the breakdown of the protective oxide scale on a 304 steel in the presence of oxygen and water vapour at 600 degrees
C  Halvarsson M, Tang JE, Asteman H, et al.
CORROSION SCIENCE 48 (8): 2014-2035 2006

Corrosivity of KCl(g) at temperatures above its dew point – Initial stages of the high temperature corrosion of alloy Sanicro 28 at 600 degrees
C Pettersson C, Svensson JE, Johansson LG MATERIALS SCIENCE FORUM 522-523: 539-546 2006

KCl-induced high temperature corrosion of the austenitic Fe-Cr-Ni alloys 304L and Sanicro 28 at 600 degrees
C Pettersson C, Pettersson J, Asteman H, et al. CORROSION SCIENCE 48 (6): 1368-1378 2006

Microstructural investigation of protective and non-protective oxides on 11% chromium steel
Liu F, Tang JE, Jonsson T, et al. OXIDATION OF METALS 66 (5-6): 295-319 (2006)

In-situ measurements by impedance spectroscopy of highly resistive alpha-alumina
Oijerholm J, Pan J, Leygraf C CORROSION SCIENCE 48 (1): 243-257 2006

Concentration-dependent diffusion of hydrogen in vitreous silica
Rundgren J, Dong Q, Hultquist G
JOURNAL OF APPLIED PHYSICS 100 (10): Art. No. 104902 2006

Does nitrogen transport in vitreous silica only take place in molecular form?
Dong Q, Hultquist
G
JOURNAL OF APPLIED PHYSICS 100 (10): Art. No. 104904 2006

Thermal regimes of passivative oxide film formation on Al surface: Theoretical and experimental study
Belonoshko AB, Rosengren A, Hultquist
G SURFACE SCIENCE 600 (20): 4796-4800 2006

Effects of O2 dissociation on a porous platinum coating in the thermal oxidation of GaAs
Hultquist G, Graham MJ, Wee ATS, et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY 153 (2): G182-G186 2006

Erosion-corrosion of laser and thermally deposited coatings exposed in fluidised bed combustion plants
Hjornhede A, Sotkovszki P, Nylund
A
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION 57 (4): 307-322 2006

Metal dusting on an alumina forming Ni-base alloy
Szakalos P, Lundberg M, Pettersson
R
CORROSION SCIENCE 48 (7): 1679-1695 2006

Experimental validation of CFD models for fluidized beds: Influence of particle stress models, gas phase compressibility and air inflow models
Johansson K, van Wachem BGM, Almstedt
AE
CHEMICAL ENGINEERING SCIENCE   Volume: 61   Issue: 5   Pages: 1705-1717   2006

Other publications

J. Storesund, G. Sund, R. Pettersson, M. Nordling, J. Högberg, Åtgärder mot eldstadskorrosion / Countermeasures to corrosion of waterwalls, Värmeforsk M06-601 (2006)

M. Eskner, P. Szakálos, R. Pettersson, M. Lundberg, B. Ivarsson, B. Jönsson: Evaluation of potential strategies to mitigate metal dusting. Internal report KIMAB-2006-527 (2006)

P. Szakálos, R. Pettersson, P. Henderson, A. Stålenheim, Peter Sjövall, Mitigation of chloride-induced corrosion in waste and biomass-fired boilers. KME 308, KIMAB-2006-809 (2006)

M. Spiegel, H. Asteman, (MPI-E) S. Vodegel (CUTEC), R. Kull (USTUTT), R. Pettersson (KIMAB), G. Pimenta (ISQ), I. Azkarate (Inasmet), G. Paradisi (TTR), F. Mancia (CSM) Materials for increased performance in sustainable fuel combustion (BIOWAS), Final report under contract RFS-CR-03020

R. Pettersson, J. Flyg, S. Cadeo, F. Karlsson: High temperature corrosion of nickel base alloys in environments containing alkali sulphate. Värmeforsk M5-515, KIMAB-2007-504

Peter Viklund, Rachel Pettersson: Underlag för miljöval vid simulering av förgasningsprocesser (Basis for selection of environment simulating gasification processes). Internal report KIMAB

R. Pettersson, S. Caddéo, U. Gudmunds Ohlsson: Short-term testing of burner materials in a
reducing environment. Internal report KIMAB-2007-554

M. Eskner, P. Szakálos, R. Pettersson, Mats Lundberg, B. Ivarsson, B. Jönsson: Evaluation of potential strategies to mitigate metal dusting. Internal report KIMAB -2007-555

R. Pettersson, J. Flyg, J. Enecker Screening tests of alloy performance in chlorinating and sulphidising environments, KIMAB-2007-516

M. Norell, Påverkan från urea och ammoniak på åldringen och livslängden hos rostfria avgasefterbehandlingssystem och –komponenter, (Translation: Influence of urea and ammonia on ageing and lifetime of stainless exhaust gas aftertreatment systems and components), Final report, Gröna Bilen 1, Project 25354-1

Conference presentations (including invited lectures)

Turbine Forum 2006 invited lecture K.Stiller, “The oxide metal interface in aluminide diffusion coatings”

Gordon 2007 Invited lecture J.E. Svensson, ”Corrosion issues in environments of bio-mass fired boilers”

Gordon Confernce 2007: P. Knutson, H. Svensson K. Stiller “ Microscopy of oxidation of NiAl and NiAlPt model alloys”

Sino-Swedish Structural Materials Symposium 2007 , Bejing, Invited lecture L.-G. Johansson “Critical corrosion phenomena on superheaters in biomass and waste-fired boilers”

Verfahrenstechnik und Konstruktion in Grossfeueranlagen Frankfurt 2007, Invited lecture LG Johansson, “Beneficial effects of sulphur additions on superheater corrosion”

Dechema Conference 2007 oral P. Knutsson K. Stiller, “Oxidation and alkali sulphate induced corrosion of aluminide diffusion coatings with and without platinum”

EMAG 2007 Glasgow UK, 2007, oral M. Halvarsson, “Thin foil analysis in the SEM”

Les Embiez 2008 oral K. Stiller “Studies of high temperature oxidation and corrosion of Pt-free and Pt-modified aluminide coatings “

Les Embiez, 2008, oral J. Pettersson, “Influence of different chloride salts on the high temperature corrosion of stainless steel (304L)”

Les Embiez, 2008 oral, M. Norell “Scale growth on austenitic alloys under KCl deposits at 500°C”

Microscopy of Oxidation, Chester, 2008 oral J Engkvist, “Oxidation of FeCrAl foils at 500-900°C in dry O2 and O2 with 40% H2O”

Microscopy of Oxidation, Chester, UK 2008, oral M. Halvarsson, “ Microstructural investigation of the initial oxidation at 1450°C and 1500°C of a Mo(Si,Al)2-based composite”

Microscopy of Oxidation, Chester, UK 2008, R. Pettersson, F. Karlsson, J. Flyg, “Hot corrosion of two nickel-base superalloys under alkali sulphate deposition conditions “

Microscopy of Oxidation, Chester, UK 2008, R Pettersson, “Effects of composition on the corrosion of Fe-Ni-Cr alloys in chlorinating and sulphidising environments”

TMS conference in San Francisco 2008 L. Viskari, K. Stiller, G. Sjöberg “The Effect of Grain Boundary Microstructure on Hold-Time Crack Growth in Allvac 718Plus Superalloy

EUROCORR 2008, 7-11 September 2008, Edinburgh, UK, P. Viklund, R. Pettersson, A. Hjörnhede, P. Henderson, and P. Sjövall , “The effect of a sulphur-containing additive on the initial corrosion of superheater tubes in a waste-fired boiler”

Eurocorr 2008, 7-11 September, Edinburgh R. Pettersson, J. Storesund, M. Nordling, “Corrosion of overlay weld cladding in waterwall of a waste-fired CFB boiler”

PRIME 2008, Electrochemical Society, Honolulu, USA oral Sead Canovic, “Microstructural investigation of the water vapour effect on the oxidation of the FeCrAl alloy Kanthal AF at 600 and 800°C”

PRIME 2008, Electrochemical Society, Honolulu, USA oral J. Engkvist, “Microstructural investigation of the oxide formed on a FeCrAl alloy (Kanthal APMT) at 900-1100°C in O2 and in O2 + H2O”

NACE Corrosion 2009, March 22-26, 2009, Atlanta, Georgia, USA, R. Pettersson, J. Flyg, P. Viklund, “High Temperature Corrosion Under Simulated Biomass Deposit Conditions”
Gordon 2009 Invited lecture Invited M. Halvarsson

©2017 High Temperature Corrosion centre at Chalmers University | Producerad av Tigerton